12
EN
7)
Press
MENU
.
VCR Operation
VCR Features
Ensure that all VCR setting begins in VCR mode by pressing
VCR
.
(Make sure that the VCR OUTPUT indicator is lit.)
Playback
Tracking Adjustment
• Tracking adjustment will be activated automatically
(Digital Tracking function) when you start playback.
• When playing pre-recorded tapes or tapes recorded on units
other than your own, noise lines (black and white streaks)
may appear on the playback picture. If this occurs, you can
adjust the tracking control manually by pressing
CH.
(
K
/
L
) until the streaks disappear. To return to the
DTR function, stop the tape once and start playback again.
• You can reduce the noise lines by pressing
CH.
(
K
/
L
) in
Slow mode, too. Slow tracking adjustment is not set
automatically.
• In the Still mode, press
SLOW
, and press
CH.
(
K
/
L
) until
the streaks disappear. To return to the Still mode, press
PAUSE
again.
1)
Turn on the TV and select the video channel on the TV.
2)
Insert a prerecorded tape.
The DVD/VCR will turn on automatically. If the erase-
protection tab has been removed, the DVD/VCR will
start playback automatically.
•If the DVD/VCR power was already on, press
VCR
to
switch to VCR mode.
3)
If playback does not start automatically, press
VCR
, then
press
PLAY
.
•Tracking adjustment will be activated automatically
(Digital Tracking function) when you start playback. To
adjust the tracking manually, press
CH.
(
K
/
L
).
<If a tape is already in the DVD/VCR...>
•Using the buttons on the DVD/VCR
Just press
PLAY
on the DVD/VCR. Power will
automatically turn on and playback will start. (Direct
Button Operation)
•Using the buttons on the remote control
Press
FUNCTION
to turn on, and then press
PLAY
.
4)
Press
STOP
to stop playback.
Speed Search
1)
Press
g
or
h
during playback to view a videotape at a
high speed in either a forward or reverse direction. In this
mode, the sound will be muted.
2)
Press the button again, the DVD/VCR will now search in
super high speed. (This function will not operate for a
NTSC tape.)
3)
Press
PLAY
to return to normal playback.
Still Picture
Press
PAUSE
during playback to view a still picture on the TV
screen.
• When the picture begins to vibrate vertically, stabilize the
picture by pressing
CH.
(
K
/
L
) in the Still mode.
• After the DVD/VCR has been in Still mode for 5 minutes,
it will stop automatically to protect the tape and the video
head.
<Note for “Speed Search” and “Still Picture”>
• Usually there will be video “noise” lines (black and white
streaks or dots) on the screen. This is normal.
The still picture will, in addition to containing the “noise”
lines, be black and white.
This is not a fault of the machine but merely a by-product
of the technology involved in producing a DVD/VCR with
LP mode.
INITIAL
CH TUNING
CLOCK
RF OUT
CH TUNING
AUTO
MANUAL
MOVE
MOVE
P01:
P02:
P03:
P04:
P05:
01
02
03
04
05
P06:
P07:
P08:
P09:
P10:
06
07
08
09
10
Position
Number
Channel
Number
[ ]
MOVE
P01:
P02:
P03:
P04:
P05:
01
02
10
04
05
P06:
P07:
P08:
P09:
P10:
06
07
08
09
03
[ ]
MENU
TIMER
SET UP
INITIAL
MOVE
P01:
P02:
P03:
P04:
P05:
01
02
10
04
05
P06:
P07:
P08:
P09:
P10:
06
07
08
09
03
FUN_ H97L2BD(EN).fm Page 12 Tuesday, July 27, 2004 6:06 PM
