ENVIRONMENTAL INFORMATION
Packaging:
The materials used in the packaging of Full Gauge products are 100% recyclable. Try to
perform disposal through specialized recyclers.
Product:
The components used in Full Gauge controllers can be recycled and reused if
disassembled by specialized companies.
Disposal:
Do not incinerate or dispose the controllers that have reached the end of their service as
household garbage. Observe the laws in your area regarding disposal of electronic
waste. If in doubt, please contact Full Gauge Controls.
TERMO DE GARANTIA
- FULL
GAUGE CONTROLS
Products manufactured by Full Gauge Controls, as of May 2005, have a two (02)
year warranty, as of the date of the consigned sale, as stated on the invoice. They are
guaranteed against manufacturing defects that make them unsuitable or inadequate
for their intended use.
EXCEPTIONS TO WARRANTY
The Warranty does not cover expenses incurred for freight and/or insurance when
sending products with signs of defect or faulty functioning to an authorized provider of
technical support services. The following events are not covered either: natural wear
and tear of parts; external damage caused by falls or inadequate packaging of
products.
LOSS OF WARRANTY
Products will automatically lose its warranty in the following cases:
- The instructions for assembly and use found in the technical description and
installation procedures in Standard IEC60364 are not obeyed;
- The product is submitted to conditions beyond the limits specified in its technical
description;
- The product is violated or repaired by any person not a member of the technical
team of Full Gauge Controls;
- Damage has been caused by a fall, blow and/or impact, infiltration of water,
overload and/or atmospheric discharge.
USE OF WARRANTY
To make use of the warranty, customers must send the properly packaged product to Full
Gauge Controls together with the invoice or receipt for the corresponding purchase. As much
information as possible in relation to the issue detected must be sent to facilitate analysis,
testing and execution of the service.
These procedures and any maintenance of the product may only be provided by Full
Gauge Controls Technical Support services in the company's headquarters at Rua Júlio de
Castilhos, 250 - CEP 92120-030 - Canoas - Rio Grande do Sul – Brasi
Rev. 03
Copyright 2020
All rights reserved
EASYPROG
8.
OPTIONAL ITEMS - Sold Separately
EasyProg
-
version 2 or later
It is an accessory which stores the parameters of controllers. At any time, It is possible to load new
parameters of a controller and unload them on a production line (of the same controller), for example.
It is provided with three types of connections for loading or unloading the parameters:
- Serial RS-485:
It is connected via RS-485 network to the controller
(only for those controllers provided with RS-485).
- USB:
It is connected to the computer via USB port, using the Sitrad Preset Editor.
- Serial TTL:
The controller may be connected directly to
EasyProg
via Serial TTL connection.
Ecase
Recommended for the Evolution line, it prevents water from entering the back part of the instrument. It
protects the product when the installation site is washed.
Extension Frame
The Full Gauge Controls extension frame allows the installation of Evolution and Ri line controllers with
maximum measures of 76x34x77mm (2,99x1,31x3,03'’) (dimensions of the clipping for fixing in the
extension frame are 71x29mm (2,80x1,14)) in varied situations, as it eliminates precision cut to embed the
instrument. It allows customization through a sticker with the brand and company contact, in addition to
being accompanied by two 10A (250 Vac) switches that can trigger internal light, air curtain, on/off system
or fan.
[Eind]
[ErP1]
[ErP2]
[Ert1]
[At1h]
[Ert2]
[At2h]
[Plo1]
[Ah2o]
[Aint]
[Plo2]
[Phi1]
[Phi2]
[Ap1l]
[Ap2l]
[Ap1h]
[Ap2h]
[At1l]
[At2l]
7. SIGNALING
Error in the choice of the measurement to ideally be displayed.
Parameterize the function F02 - Display indication mode.
Error in the P1 pressure transducer: Transducer disconnected,
damaged or not enabled.
Error in the T1 temperature sensor: Sensor disconnected,
damaged or not enabled.
Error in the P2 pressure transducer
Error in the T2 temperature sensor.
High temperature in sensor T2 alarm.
Low pressure in the P1 transducer.
Low water level alarm in well/tank alarm.
Interlock alarm
Low pressure in the P2 transducer.
High pressure in the P1 transducer.
High pressure in the P2 transducer.
Low pressure in transducer P1 alarm.
Low pressure in transducer P2 alarm.
High pressure in transducer P1 alarm.
High pressure in transducer P2 alarm.
Low temperature in sensor T1 alarm.
Low temperature in sensor T2 alarm.
High temperature in sensor T1 alarm.
[Flo,]
[Af1l]
[Asbl]
[Asbh]
[din2]
[Aspl]
[inib]
[Asph]
[lOC,]
[ON,,]
[lOC,]
[Off,]
[Off,]
[Man1]
[Man2]
[din1]
[ECAl]
[Pppp]
Lack of water flow alert in the rotation mode.
Alarm for changing the filters.
Low sub-cooling alarm.
High sub-cooling alarm.
Digital input alarm 2.
Low superheating alarm.
Alarm inhibited.
High superheating alarm.
Function lock.
OUT1 compressor/pump maintenance warning.
Function unlock.
OUT2 compressor/pump maintenance warning.
Control functions turned off.
Digital input alarm 1.
Contact Full Gauge.
Reconfigure the values of the functions.
