RAGNARÖK
Manual
Page 6
LFO Section
Speed
This sets the frequency of the LFO. The speed can be set between 0.001 Hz and 100
Hz.
Ramp
This is a delay time that makes the LFO-signal fade in after a short delay. This makes
it possible to create mod-wheel like vibrato and wah-wah effects without actually
using a mod-wheel.
NOTE 1: As a side-note; the original RAGNARÖK did not have a mod-wheel and this
functionality was used as a substitute for that.
NOTE 2: The LFO signal is also available in the Filter-section for Filter Cutoff
modulation. Both 'Speed' and 'Ramp' are affecting the Filter modulation when used
there.
NOTE 3: When using the mod-wheel options (see Settings-section) the modulation
will take the ramp into account, so no modulation is heard when using the mod-wheel
before any set ramp-time.