RAGNARÖK
Manual
Page 18
Settings
The settings section contains several options for performance, host-sync and basic
settings for the synthesizer like pitchbend-range and base-tuning. There are also
setting that influence the spread/detune and interval options in the voice-selection
panels.
Tun.
Tuning:
This is the basic tuning of the instrument. Default tuning is A-440Hz. Tuning
is stored for each patch, so you need to (re)tune each patch that you want to use with
that tuning.
Len.
Trigger length:
The knob sets the trigger length (duty-cycle) of the repeat function
in the performance section. This is equal to the time a key is pressed if you would
repeat a note on a keyboard.
Int.
Interval:
This knob sets the note-interval for the 'Interval' voices in the voice
selection panel. Default interval is a 'fifth'. You can tune the interval back to center
tuning (and both above or under that) for additional chorus-like effects in addition to
the 'Spread' option (see below).
Spr.
Spread/Detune:
This is where the RAGNARÖK magic happens: the knob sets the
spread/detune of the three oscillators (for each octave) that you can switch on in the
'multi-voice' section of the voice selection panels. Detune goes from 'exact tune' to 1
semitone detune where the three voices are detuned at equal distances between
-/+ 1 semitone.
