RAGNARÖK
Manual
Page 22
Skinning path settings
You can add paths that point to specific graphics in any location that you have them,
as long as the complete path is given in the INI-file.
Bitmaps that you don't want to replace can be set to default (see example below), or
left out of the INI-file completely.
The INI-section should look like this:
[Editor]
Bitmap_Back = D:\alternate_skins\myown\1.png
Bitmap_Slider = D:\alternate_skins\myown\100.png
Bitmap_Knob1 = default
Bitmap_Knob2 = default
Bitmap_Switch1 = D:\alternate_skins\myown\300.png
Bitmap_Switch2 = D:\alternate_skins\myown\301.png
Bitmap_Switch3 = default
Bitmap_Switch4 = default
Bitmap_Button1 = default
Bitmap_Button2 = default
Bitmap_Button3 = default
Bitmap_Button4 = default
Bitmap_Digits = default
