EN
17
8 - Conversion to a Different Type of Gas
Replace Injectors (two ring flame burner)
1. Remove the grates and burner caps.
2. Remove aluminium gas spreader.
3. Remove the three screws from the simmer gas spreader
(
1
).
4. Remove the two screws of the injector cover (
2
).
5. Remove injector (
A
) by using a 9-32” (7mm) nut driver
counter clockwise.
6. Remove injector (
B
) by using a 9-32” (7mm) box wrench
counter clockwise.
7. Install the injectors supplied with this appliance in the
appropriate burner. The injectors have small numbers
stamped on the side, this number corresponds with the
orifice diameter and its correct burner location (refer to
illustrations in the section: “Injectors Position”).
8. Turn clockwise to tighten (tighten to a torque of 15 to 20
inch-lbs).
9. Replace all parts following the reverse order.
10.
Save the injectors removed from the appliances for
future use.
EXPLODED VIEW OF BURNER
1
2
B
A
Содержание Sofia FSRT 3606 G X
