INTRODUCTION
Overview
SAFETY
WARNING
Thank you for purchasing the Fukuda FRE-203XR RED beam rotary laser kit.
These instructions are intended to explain the general basics of operating this equipment.
Please read them carefully.
For any more information, or if the laser requires calibration or repair; then please contact our
Service Department by Telephone:
08000 869 769
or Email:
The Fukuda FRE-203XR is accurate, well-featured and competitively priced. It replaces the
extremely reliable Fukuda FRE-301R, to which it shares many of its internal components. It
builds upon this foundation to incorporate many new features and improvements. This is
currently the only model in the Fukuda range which is extremely robust, having a drop-test
specifi cation of 1 metre onto concrete. The top glass “lighthouse” is protected by a metal die-
cast cover whilst a robust roll cage adds increased durability.
It’s a professional laser level kit from the Fukuda Laser Company. They are specialists in their
fi eld of laser level manufacture & certifi ed to ISO-9001.
The FRE-203XR quickly auto levels to set horizontals, verticals and 90-degree site squaring. An
invaluable feature.
In addition, this laser can be switched to Manual mode where the spinning beam can set a
grade (fall) in the X-axis, Y-axis or both together (dual grade). You can only grade match with this
system and not key in a value, however, it will set up to a 1:10 (10%) grade.
Read the following safety instructions before attempting to operate this Laser Level Kit.
Keep these instructions in a safe place or store in the Laser’s carry case for future reference.
- Do not remove warning labels from the product.
- The FRE-203XR is a class 2 laser product (<1 mW; 630 - 685nm)
3
Never look into the laser beam or direct it to the eyes of other people.
Always operate the Laser Level in a way that prevents the beam from
getting into people’s eyes.
Using the FRE-203XR diff erently than described in the user guide, may
result in unsafe operation.
