manualshive.com logo in svg

Fujitsu XG700 - Switch, Руководство пользователя

Сетевой коммутатор Fujitsu XG700 обеспечивает высокую производительность и надежную работу вашей сети. Пользовательский мануал доступен для загрузки бесплатно на manualshive.com. Ищите информацию о настройке и использовании в руководстве пользователя. Улучшите работу вашей сети с помощью этого продукта от Fujitsu.

Поделиться
Скачать
background image

XG700 User's Guide 

103/266

 

 

All Rights Reserved, Copyright (C) PFU LIMITED 2005-2006 

 

Protocol 

The control protocol to comprise a link aggregation is displayed. 

− 

None 

Comprises a static link aggregation. 

− 

LACP - Active 

Uses LACP as the control protocol for link aggregation, and comprises a link aggregation by LACP in Active 
mode. 

− 

LACP - Passive 

Uses LACP as the control protocol for link aggregation, and comprises a link aggregation by LACP in Passive 
mode. 

 

Distribution algorithm 

Displays the distribution method of frame forwarding destination. 

− 

Destination address 

This is a distribution method based on the destination MAC address of a frame. 

− 

Source address 

This is a distribution method based on the MAC address from which a frame is sent. 

− 

Destination address & Source address 

This is a distribution method based on the information of the destination MAC address of a frame and the MAC 
address from which a frame is sent. 

 

Distribution parameter 

Displays the parameter to calculate the frame distribution method.   

 

The minimum number of ports 

Displays the port number in link up state required to maintain link up state of the aggregation group. 

 
Static link aggregation specific information 
This is used to display the state of each port comprising a static link aggregation. 
[port 1] 

Indicates the port number to display. 

 

Port Status 

The status of the port is displayed. 

− 

Active 

The port is usable. 

− 

Inactive 

The port is not usable. 

 

Output form (in case of LACP link aggregation) 

xg# show link-aggregation 
Link  Aggregation  Information                                2005/04/24-16:16:36 
===============================================================================  
System Priority : 32768 
System  ID        :  0080.17c2.05e2 
------------------------------------------------------------------------------- 
[agg-port 1] 
  Master  port                   

 

: port <1-12> 

  Management packet send port : port <1-12> 
  Mac  address                   

 

: 0080.17c2.2144 

  Protocol                        :  {  LACP  -  Active  |  LACP  -  Passive  } 
  Distribution  algorithm       :  {  Destination  address  |  Source  address 
                                      |  Destination  address  &  Source  address} 
  The minimum number of ports : 1 
 
  System  Key                    

 

: 1 

  Partner  System  Priority      :  32768 
            System  ID             :  0080.17c2.05e2 

          Key                    : 2 
 

[port 1] 

Port  Status                   

 

: {Active | Inactive } 

Port  Priority                  :  32768 
Synchro  State                  :  {  Sync  |  No  Sync  } 
Receive State                  

 

: { Invalid | Initialize | Port Disabled | LACP Disabled| Expired

                                    |  Defaulted|  Current} 
Periodic Tx State             : { Invalid | No Periodic | Fast Periodic | Slow Periodic } 
Partner  Port  Priority       

 

: 32768 

Partner  Port  Number           :  10011 
Partner  Synchro  State        

 

: { Sync | No Sync } 

[port 2] 
Port  Status                     :  {  Active  |  Inactive  } 
Port  Priority                  

 

: 32768 

Synchro  State                  

 

: { Sync | No Sync } 

Receive State                   : { Invalid | Initialize | Port Disabled | LACP Disabled | Expired
                                    |  Defaulted|  Current} 
Periodic  Tx  State             

 

: { No Periodic | Fast Periodic | Slow Periodic } 

Partner  Port  Priority        

  

: 32768 

Partner  Port  Number           

 

: 11 

Partner  Synchro  State         

 

: { Sync | No Sync } 

[agg-port 2] 
                
                
=============================================================================== 

 

Содержание XG700 - Switch











































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для XG700 - Switch

Pathway connectivity solutions 1016 Manual preview
1016
Бренд: Pathway connectivity solutions Страницы: 2
Exsys EX-1183HMVS-2W Manual preview
EX-1183HMVS-2W
Бренд: Exsys Страницы: 14
Leonton EG2-1600 Series User Manual preview
EG2-1600 Series
Бренд: Leonton Страницы: 19
Eaton S-T0 Instruction Leaflet preview
S-T0
Бренд: Eaton Страницы: 3
A SYSTEMS AV800HD User Manual preview
AV800HD
Бренд: A SYSTEMS Страницы: 80
Bryston SPV1 Owner'S Manual preview
SPV1
Бренд: Bryston Страницы: 8
Black Box LH8112A Installation And User Manual preview
LH8112A
Бренд: Black Box Страницы: 132
FM Systems VLS771-2 Installation Manual preview
VLS771-2
Бренд: FM Systems Страницы: 5
CYP OR-32USBC-4K22 Operation Manual preview
OR-32USBC-4K22
Бренд: CYP Страницы: 64
Belkin OmniView F1D066 User Manual preview
OmniView F1D066
Бренд: Belkin Страницы: 12
Intel True Scale Fabric 12000 Series Reference Manual preview
True Scale Fabric 12000 Series
Бренд: Intel Страницы: 125
Icy Box IB-HUB1411-QC3 Quick Installation Manual preview
IB-HUB1411-QC3
Бренд: Icy Box Страницы: 8
Lantech LPES-2224C User Manual preview
LPES-2224C
Бренд: Lantech Страницы: 108
Abus FUBE50061 Installation Instructions And User Manual preview
FUBE50061
Бренд: Abus Страницы: 188
CyberView CV-801H User Manual preview
CV-801H
Бренд: CyberView Страницы: 28
JVC JX-S111-S-J Instructions preview
JX-S111-S-J
Бренд: JVC Страницы: 2
JVC JX-S333 Instructions Manual preview
JX-S333
Бренд: JVC Страницы: 26
JVC JX-S555 Instructions Manual preview
JX-S555
Бренд: JVC Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды