BACnet Gateway for VRF System
INSTRUCTION MANUAL r1.4.0 eng
145/159
Copyright© 2021 Fujitsu General Limited - All rights reserved
Figure 8.2
Get Project from Device view
8.3 Connection
Use this section to configure the connection between the laptop or desktop to the gateway.
Figure 8.3
Connection configuration
NOTE:
If using IP connection, the Configuration Tool will automatically scan the IP network for the
gateway and will show it in the list. Notice that in that case, a password is required. Default values for
IP connection are:
IP: 192.168.100.246 / Password: admin
If installing more than one BACnet Gatewy for VRF System, connect them one by one and assign an
IP to each of them in case DHCP is not available.