Fujitsu stylistic lt, Справочное руководство

Страница: 56 / 132

3-36 Configuring the Stylistic LT Pen Tablet System
Save to Disk Partition Exists 3
The following text is displayed when a PHDISK /CREATE /PARTITION operation is attempted while a
save-to-disk partition exists.
Error:Phoenix NoteBIOS Save to Disk partition already exists. To resize the
partition, delete the existing partition with PHDISK/DELETE and create the
partition with PHDISK/CREATE.
Reallocate the save-to-disk partition if needed, or use the /CREATE /FILE option instead. (Note that a
partition will require contiguous disk space.)
Too Many Bad Sectors 3
The following text is displayed when the save-to-disk partition is too small because of an increasing
number of bad sectors.
Error: Too many errors exist in the Phoenix NoteBIOS (tm) Save to Disk
partition. Check your hardware configuration and rerun PHDISK.
Execute PHDISK /CREATE /FILE to create a save-to-disk file.
First Two Sectors Bad 3
The following text is displayed when the save-to-disk partition cannot be used.
Error: The first two sectors in the Save to Disk partition are both
unusable. This disk is unsuitable for the Phoenix NoteBIOS Save to Disk
feature.
Attempt to reformat the partition using PHDISK /REFORMAT /PARTITION. (You may need to first
delete the partition using PHDISK /DELETE /PARTITION depending on the disk error.)
PHDISK /CREATE Failed to Execute 3
The following text is displayed when no save-to-disk partition exists, or the partition table on head 0,
cylinder 0, sector 1 is corrupted.
Error: The Phoenix NoteBIOS (tm) Save to Disk partition doesn't exist or the
hard disk partition table on head 0, cylinder 0, sector 1 is corrupted.
Invoke PHDISK/CREATE to create the Save to Disk partition.
Execute PHDISK /CREATE /PARTITION.
Good Sector Map Corrupted 3
The following text is displayed when a save-to-disk partition exists but the GSM is corrupted.
Error: The "Good sector map" (GSM) in the Phoenix NoteBIOS Save to Disk
partition is bad. Invoke PHDISK /REFORMAT to rebuild this table.
Use PHDISK /REFORMAT /PARTITION to reset the GSM flags.