Fujitsu stylistic lt, Справочное руководство

Страница: 31 / 132

BIOS Setup 3-11
Security Menu Options 3
Security menu options for the Stylistic LT pen tablet are described in Table 3-8. Note that settings for
some security menu options determine whether other options are available.
Table 3-8 BIOS Setup Security Menu Options
Option Settings Description
Security Mode Security Card
Normal Determines whether a security card is required to
input the password. Selecting Normal allows input of
password through the keyboard.
Set Supervisor Password (Tap on the setting field for
this option or press Enter to
specify a supervisor
password.) Specifying a supervisor password grants access to
all password protected Security menu options.
When a supervisor password is enabled and a user
password is used to enter BIOS Setup, the user
cannot access the following Security menu options:
Set Supervisor Password, Diskette Access, and
Fixed Disk Boot Sector.
When Enabled, a supervisor password (or user
password if used) is required to run BIOS Setup.
Supervisor Password Is Enabled
Disabled Indicates whether a supervisor password has been
specified. (This field cannot be changed directly. To
enable or disable the supervisor password, enter a
new password or clear the old password using the
Set Supervisor Password option.)
Set User Password (Press Enter to specify a user
password.) Specifying a user password grants access to the
following Security menu options only: User
Password, Password On Boot. Other Security menu
options are not accessible.
(When a supervisor password is enabled and a user
password is used to enter BIOS Setup, the user
cannot access the following Security options: Set
Supervisor Password, Diskette Access, Fixed Disk
Boot Sector.)
When enabled, a user (or supervisor) password is
required to run BIOS Setup.
Note that a supervisor password must be enabled
before a user password can be specified.
User Password Is Enabled
Disabled Indicates whether a user password has been
specified. (This field cannot be changed directly. To
enable or disable the user password, enter a new
password or clear the old password using the Set
User Password option.)
Password On Boot Disabled
Enabled Select Enabled to require a user or supervisor
password to boot the system. Note that a user or
supervisor password must be specified before this
option can be enabled.