Fujitsu stylistic lt, Справочное руководство

Страница: 27 / 132

BIOS Setup 3-7
Integrated Peripherals Submenu Options 3
Configuration options for the Integrated Peripherals submenu are given in Table 3-4. Note that some
peripheral interfaces are only available when using a device attached to the system interface port such as
the Stylistic LT Mini-Dock.
Table 3-4 BIOS Setup Integrated Peripherals Submenu Options
Option Settings Description
Serial Port A Disabled
Enabled
Auto Determines whether serial port A is active and the
method used to configure serial port A.
Select Auto to allow the BIOS or operating system to
configure the port automatically. Select Enabled to
configure the Base I/O Address and Interrupt options
manually in BIOS setup. Select Disabled to turn
serial port A off.
Base I/O Address 3F8
2F8
3E8
2E8 Determines the base I/O address used for serial port
A. The Serial Port A option must be set to Enabled
before this setting can be changed.
Interrupt IRQ 3
IRQ 4
IRQ 10
IRQ 11 Determines the interrupt request level used for serial
port A. The Serial Port A option must be set to
Enabled before this setting can be changed.
Serial Port B Disabled
Enabled
Auto Determines whether serial port B is active and the
method used to configure serial port B.
Select Auto to allow the BIOS or operating system to
configure the port automatically. Select Enabled to
configure the Base I/O Address and Interrupt options
manually in BIOS setup. Select Disabled to turn
serial port B off.
Device IrDA
FIR
Determines which physical interface serial port B is
assigned to. Select IrDA to use the IrDA port in
Standard IR (SIR) mode (115 Kbps). Select FIR to
use the IrDA port in Fast IR mode (4 Mbps).
Base I/O Address 3F8
2F8
3E8
2E8 Determines the base I/O address used for serial port
B. The Serial Port B option must be set to Enabled
before this setting can be changed.
Interrupt IRQ 3
IRQ 4
IRQ 10
IRQ 11 Determines the interrupt request level used for serial
port B. The Serial Port B option must be set to
Enabled before this setting can be changed.
2nd Base I/O Address 100
108
110
118 Determines the 2nd base I/O address for serial port
B. This option is only selectable when the Serial Port
B Device setting is FIR.
FIR DMA Channel DMA 1
DMA 3 Determines the DMA channel assigned to serial port
B when using Fast IR mode. This option is only
selectable when the Serial Port B Device setting is
FIR.