Chapter 6 Replacing the Consumables
83
6
Attach the shaft.
1 Insert the left side of the shaft into the hole, and then attach the
right side of the shaft.
2 Close the cover.
7
Close the ADF.
For details, refer to
"1.4 Opening/Closing the ADF" (page 25)
.
8
Reset the consumable counter.
Start up the Software Operation Panel and reset the counter.
For details, refer to
"Resetting the sheet counters" (page 130)
ATTENTION
Confirm that the brake roller is installed properly. Otherwise, it may
cause feeding errors such as paper jams.
Be careful not to have your fingers caught
when closing the ADF.
2
1
Brake roller
Shaft