Service Supplement TX600 S3
37
Replacement routines
Replacing the SCSI backplane
Installing the SCSI backplane
Figure 19: Inserting the SCSI backplane
Ê
Insert the new SCSI backplane so that the recess at the bottom edge of the
SCSI backplane fits onto the lug (A) in the housing.
I
Make sure none of the cables are jammed.
Before attaching the SCSI backplane, connect the cables for the control
panel and the control panel board (see area (B) in
).
I
The connectors for these cables will be hard to reach later.
A
B