Fujitsu PRIMERGY TX300 S3, Инструкция по настройкам, Страница: 82 / 109

82 Options Guide
TX300 S3
Rack model Completion
Ê Push the left-hand side cover all the way forward (2).
Ê Push down the latch to lock the left-hand side cover (3).
Ê Insert the key.
Ê
Lock the server.
Ê
Connect all power plugs to the power outlets.
Ê
Press the on/off key to start up the server.
12.2 Rack model
12.2.1 Attaching the rack front cover
Reattach the rack front cover after implementing the following extensions:
– Installation of further accessible drives
– Conversion of the floorstand model to a rack model
Figure 73: Attaching the rack front cover
Ê Attach the rack front cover, together with the plastic cover, from the front (1).
V
CAUTION!
The words “left” and “right” are printed on the angles of the rack front
cover to indicate which way round it must be installed.
Ê
Attach the rack front cover using two screws on each side (2).
2
2
1