Fujitsu PRIMERGY TX300 S3, Инструкция по настройкам, Страница: 26 / 109

26 Options Guide
TX300 S3
Equipping rules Main memory
– The memory modules have to be based on x4 or x8 organised
FBD533/PC2-4200F or FBD667/PC2-5300F fully buffered DIMM modules
and must be populated in pairs. It is only allowed you use memory modules
released by Fujitsu Siemens Computers.
– Each pair must consist of identical memory modules (2 way interleaved
mode).
– The module capacity between pairs can differ: pair 1A/1B can be populated
with two 512 Mbyte modules and pair 2A/2B with two 1 Gbyte modules.
The table below shows the order in which the memory banks must be equipped:
Memory mirroring
Either 4 or 8 identical memory modules are required for memory mirroring:
module pair
1A/1B module pair
1C/1D module pair
2A/2B module pair
2C/2D
Equipped Empty Empty Empty
Equipped Equipped Empty Empty
Equipped Equipped Equipped Empty
Equipped Equipped Equipped Equipped
Memory
bank 1 1 2 2
Channel
(module) A B C D A B C D
Equipment 4 identical memory modules - -
8 identical memory modules