Fujitsu PRIMERGY TX1320 M1 Скачать руководство пользователя страница 85

Страница: 85 / 340

TX1320 M1

Upgrade and Maintenance Manual

Basic software procedures

After completion of the flash process, remove the USB stick and restart the
server.

iRMC recovery procedure

For the Japanese market, follow the instructions provided separately.

Prepare a USB stick including the bootable iRMC firmware update image.

Ensure that the server has been shut down and disconnected from the
mains as described in section

"Shutting down the server" on page 52

Connect the USB stick to the USB port.

Ensure that only the USB device with the iRMC firmware is connected
to the USB port. Remove all other USB devices temporarily.

Connect the server to the mains while pushing the ID button on the front
panel. Ask a second person to help you if necessary.

Ensure that the Global Error indicator and the ID indicator are flashing to
indicate that the server is entering the iRMC recovery state.

Press the Power On / Off button. The system starts the POST process.

In iRMC recovery mode, the “FUJITSU” logo does not show up.

The system will detect the USB stick.

If the BIOS cannot identify the USB stick, the pop-up message

Failed to boot for Emergency flash. Please Reset now

will show up in the center of the screen.

Choose the

Recovery_L

option from the update tool menu to start the iRMC

update process.

CAUTION!

Do not interrupt the iRMC upgrade process after it has started. If the
process is interrupted, the iRMC BIOS may be permanently
corrupted.

If the iRMC does not work after flashing, disconnect the system from
the mains and reconnect it again.

Shut down the server by pressing the power On / Off button.

Disconnect the server from the mains to exit the iRMC recovery state.

Содержание PRIMERGY TX1320 M1





















































































































































































































































































































































Результаты поиска

Содержание PRIMERGY TX1320 M1

Отзывы:

Бренды по названию

Популярные бренды

Fujitsu PRIMERGY TX1320 M1, Руководство по модернизации и обслуживанию

Результаты поиска

Содержание PRIMERGY TX1320 M1

Отзывы:

Бренды по названию

Популярные бренды