SX960 S1
Operating Manual
57
Optional: Installation of a BBU
Figure 26: Inserting the BBU in the holder
Ê
Insert the BBU in the holder as follows:
1. Slide the BBU under the two plastic catches of the holder (1).
2. Carefully press it down until the two locking hooks clearly engage (see
circles).
Ê
Plug the BBU cable into the connector on the controller (see pos. 1 in
figure 24 on page 55
).
I
The plug of the BBU cable has a number printed on the back. Make
sure this side of the plug faces down, i.e. is not visible.
Ê
Close the storage blade as described in
section "Installing the BBU" on
page 54
/
/
