SX960 S1
Operating Manual
27
Installing/removing in/from the system unit
Removing the dummy blades
Any unused slots on the front of the system unit are fitted with appropriate
dummy blades to comply with electromagnetic compatibility (EMC) regulations
and to ensure sufficient cooling of the system components. The power supply
unit slots on the back do not necessarily have to be populated.
To add a SX960 S1 storage blade, you first have to remove two dummy blades
from the relevant slots.
Figure 5: Removing the dummy blades
Ê
Push up the green release levers (see arrows) and pull the dummy blades
out of their slots.
