U41181-J-Z156-1-74
13
Important notes
Notes on mounting in the rack
As the colors of the wires in the mains lead of this appliance may not correspond
with the colored markings identifying the terminals in your plug, proceed as
follows:
–
The wire which is colored Green and Yellow must be connected to the
terminal in the plug which is marked with the letter E or by the earth symbol
or colored Green or Green and Yellow.
–
The wire which is colored Blue must be connected to the terminal which is
marked with the letter N or colored Black.
–
The wire which is colored Brown must be connected to the terminal which is
marked with the letter L or colored Red.
2.7
Notes on mounting in the rack
When connecting and disconnecting cables, observe the notes in the
documentation for your PRIMERGY system and the comments in the
"Important notes" chapter in the corresponding rack operating manual
supplied with the rack.
Ensure that the anti-tilt bracket is correctly mounted when you set up the
rack.
For safety reasons, no more than one unit may be withdrawn from the rack
at any one time during installation and maintenance work.
If more than one unit is withdrawn from the rack at any one time, there is a
danger that the rack will tilt forward.
The power supply to the rack must be installed by an authorized specialist
(electrician).
