U41181-J-Z156-1-74
11
Important notes
Power cord selection
2.6
Power cord selection
2.6.1
For the United States and Canada
Use a UL listed and CSA labeled cord set consisting of a three conductor cord
with a maximum length of 15 feet.
For units which stand on a desk or table, type SVT or SJT cord sets shall be
used.
For units which stand on floor, only SJT type cord sets shall be used.
The cord set must be selected according to the current rating for your unit.
Please consult the table below for the selection criteria for power cords used in
the United States and Canada.
The power cord for this unit has been packed
separately and has been selected according to
the country of destination. It must be used to
prevent electric shock. Use the following guide-
lines if it is necessary to replace the original cord
set.
The female receptacle of the cord set must meet
CEE-22 requirements (see Figure).
Cord Type
Size of Conductors in Cord
Maximum Current Rating of Unit
SJT
18 AWG
16 AWG
14 AWG
10 Amps
12 Amps
12 Amps
SVT
18 AWG
17 AWG
10 Amps
12 Amps
