88
U41662-J-Z156-1-76
PCI boards
Hot-plug Components
8.5
Hot-plug PCI Boards
V
CAUTION!
The actions described in these instructions should only be
performed by technical specialists. Equipment repairs should only
be performed by authorized, qualified staff. Any unauthorized
openings and improper repairs could expose the user to risks
(electric shock, energy hazards, fire hazards) and could also
damage the equipment.
Please observe the safety information in
chapter “Important Notes”
on page 19
.
V
CAUTION
Each PCI slot of the server must be occupied by either a PCI board or a
dummy module, which is a supporting plate attached to a pull-out aid.
The following operations are possible while the system is running:
–
Replacing PCI boards (see
“Removing Hot-plug PCI Boards” on page 90
and
“Inserting a Hot-plug PCI Board” on page 96
)
I
Only PCI boards of the same type and with the same settings may be
exchanged. If the boards do not match, the new board will not be
commissioned.
–
Adding PCI boards (see
“Removing the Dummy Module” on page 94
and
“Inserting a Hot-plug PCI Board” on page 96
)
Ê
Before starting, you should read the accompanying documentation supplied
with the board.
