24
Operating manual
RX300
S3
Safety
Important Notes
Before operating the device
V
CAUTION!
●
During installation and before operating the device, observe the
instructions on environmental conditions for your device (see
●
If the device is brought in from a cold environment, condensation may
form both inside and on the outside of the machine.
Wait until the device has acclimatized to room temperature and is
absolutely dry before starting it up. Material damage may be caused
to the device if this requirement is not observed.
●
Transport the device only in the original packaging or in packaging
that protects it from knocks and jolts.
Installation and operation
V
CAUTION!
●
If the rack model is integrated in an installation that receives power
from an industrial (public) power supply network with the IEC309
connector, the (public) power supply protection must comply with the
requirements for the non-industrial (public) power supply networks for
the type A connector.
●
The server automatically sets itself to a voltage in the ranges of
200 V - 240 V. Make sure that your local voltage is within this range.
●
This device has a specially approved power cable and must only be
connected to a grounded insulated socket.
●
Ensure that the power socket on the device or the grounded wall
outlet is freely accessible.
●
The ON/OFF button does not disconnect the device from the mains
voltage. To disconnect the line voltage completely, remove the power
plug(s) from the grounded insulated socket(s).
Содержание Primergy RX300 S3
