manualshive.com logo in svg

Fujitsu PRIMERGY RX1330 M4, Руководство по модернизации и обслуживанию, Страница: 37 / 403

Поделиться
Скачать
Fujitsu PRIMERGY RX1330 M4 Скачать руководство пользователя страница 37

3.2.8

Transporting the server

CAUTION

▶

Only transport the server in its original packaging or in packaging
that protects it from impacts and jolts.

In Japan and APAC, transporting the server in its original packaging
does not apply.

▶

Do not unpack the server until it is at its installation location.

▶

If you need to lift or transport the server, ask other people to help
you.

▶

Never lift or carry the server by the handles or the Quick Release
Levers (QRLs) on the front panel.

Important information

RX1330 M4

Upgrade and Maintenance Manual

37

Содержание PRIMERGY RX1330 M4




















































































































































































































































































































































































































Отзывы:

Нет отзывов