Econel200 S2
Options Guide
35
Accessible drives
Installing the 5-inch multibay
Ê
Install the processor fan 2 as described in
section “Installing the processor
fan 2” on page 52
.
Ê
Close the server, connect it to the mains, and switch it on as described in
section “Closing the server” on page 53
et seq. .
7.2
Installing the 5-inch multibay
Ê
Remove the side cover as described in
section “Opening the server” on
page 17
.
Ê
Remove the processor fan 2 as described in
section “Removing the
processor fan 2” on page 18
.
Ê
Remove the system fan as described in
section “Removing the system fan”
on page 19
.
Figure 15: Screws of the lowest bay
Ê
Remove the two screws of the lowest bay and push the dummy module from
the inside through the front panel.
