Econel200 S2
Options Guide
37
Accessible drives
Installing the 5-inch multibay
Figure 17: Routing the floppy cable
Ê
Connect the floppy cable to the system board (see circle) and route the
floppy cable in the cable clamp (see arrow) as shown in the photo. Left the
cable clamp opened.
Ê
Thread the floppy cable and the power cable plugs P9/P12 through the
lowest bay and the front panel.
I
The DVD-ROM, CD-RW/DVD or DVD-RW drive must be removed or
replaced by another drive (e.g. USB drive), before installing the slimline
drive (CD-RW/DVD, DVD-RW).
Ê
Replace/remove the DVD-ROM, CD-RW/DVD or DVD-RW drive.
Ê
Thread the CDROM cable (connected before to the DVD-ROM, CD-
RW/DVD or DVD-RW drive) through the lowest bay and the front panel.
