Fujitsu MBA3073FD Скачать руководство пользователя | Manualshive

Страница: 86 / 106

background image

Diagnostics and Maintenance

6.4.3

Troubleshooting at the repair site

For maintenance at this level, we recommend additional testing of the HDD and signal checking.

The sense data posted from the HDDs help with troubleshooting. This sense data makes the error type clear
(functional, mechanical, or electrical error). Chapter 7 error analysis by sense data, and gives
supplementary information on finding the error cause (faulty part).

Table 6.3 lists how to detect a faulty HDD subassembly. This fault finding requires a working host
computer or HDD test equipment to recreate the error conditions.

If the detected error cannot be recreated in an ordinary test, HDD conditions can be changed to force
the error to recur. This is done by changing the DC voltage or the ambient temperature of the HDD.

If the error does not recur with changed conditions, the HDD is not faulty. If no error occurs in the
HDD test, notify the user of the test results, and find out from the user the environment conditions
where the HDD is used.

Table 6.3

HDD troubleshooting

Item Recommended

action

Frequent or repeated seek errors

Collect sense data, and see Chapter 7.

Replace the HDD, and check that the test method is correct. If the
error recurs, it is likely that the HDD is normal but the test method is
incorrect.

Intermittent or nonfatal errors

Replace the HDD, and check that the test method is correct. If the
error recurs, it is likely that the HDD is normal but the test method is
incorrect.

To check performance, change the HDD conditions by changing the
voltage or temperature.

If the HDD error recurs or a possibly faulty part is found by troubleshooting, return the complete
HDD to Fujitsu for repair. A media defect list must be included with the HDD returned to Fujitsu.

If the possibly faulty part is the DE, return the whole HDD to Fujitsu for repair. Also if a clear error
(erroneous servo track information or noisy HDD) is detected in the DE, return the whole HDD to
Fujitsu. A media defect list must be included with the HDD returned to Fujitsu.

Damage

•

Never remove any labels from the HDD or deface them in any
way.

•

Never open the HDD for any reason. Doing so will void any
warranties.

80

C141-E264

«
...
84
85
86
87
88
...
»

Содержание MBA3073FD











































































































Отзывы:

Нет отзывов

Похожие инструкции для MBA3073FD

Бренд: Gearwrench Страницы: 9

Бренд: Quantum Страницы: 78

ApplianceStor 15MT

Бренд: Rasilient Страницы: 30

Mobile Wi-Fi Pocket Drive

Бренд: Macally Страницы: 71

Бренд: Dancover Страницы: 12

Бренд: Western Digital Страницы: 2

SDSDQ-512-A10M - 512MB TransFlash microSD Card Retail...

Бренд: SanDisk Страницы: 1

Бренд: morse Страницы: 11

PowerVault 110T SDLT320

Бренд: Dell Страницы: 43

PowerVault 120T

Бренд: Dell Страницы: 53

Dell PowerVault MD32X0

Бренд: Dell Страницы: 33

Portable Backup Hard Drive

Бренд: Dell Страницы: 13

Бренд: Dell Страницы: 72

Express Flash NVMe PCIe SSD AIC

Бренд: Dell Страницы: 15

Бренд: Dell Страницы: 8

Бренд: Dell Страницы: 9

Бренд: Dell Страницы: 2

Бренд: Dell Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды