Fujitsu MB90M405 Скачать руководство пользователя

Страница: 12 / 28

MB90M405 F

MC-16LX FAMILY HARDWARE MANUAL

1-8

1.6

Pin Description

Tables 1-2, 1-3 and 1-4 list the pin name, function, circuit type, and reset-time state/function.

Table 1-2 Pin Description

Pin No.

QFP-100M06

Pin Name

Circuit

Type

State/function at

reset

Function

82, 83

X0, X1

Oscillation state

Oscillation input pins.

RSTX

Reset input

External reset input pin

FIP0 to FIP15

This function is selected when the FL driver is enabled.

85 to 100

LED0 to LED15

This function is selected when the LED driver is enabled.

FIP16

This function is selected when the FL driver is enabled.

LED16

This function is selected when the LED driver is enabled.

2 to 10

12 to 19

FIP17 to FIP33

20 to 22
24 to 41
43 to 47

FIP34 to FIP59

VKK Pull-down

output

Dedicated pins for the FL driver output.

P80

General-purpose I/O port

IC0

External trigger input pin for input capture 0

INT0

External factor input pin for external interrupt input 0
This pin is only accepted when it is enabled by the EN0 bit.

P81

General-purpose I/O port

IC1

External trigger input pin for input capture 1

INT1

External factor input pin for external interrupt input 1
This pin is only accepted when it is enabled by the EN1 bit.

P82

General-purpose I/O port

SI0

Serial data input pin for serial I/O channel 0
This pin is always effective when channel 0 is under input operation.

P83

General-purpose I/O port

SC0

Serial clock I/O pin for serial I/O channel 0
This pin is effective when the channel-0 clock output is enabled.

P84

General-purpose I/O port

SO0

Serial data output pin for serial I/O channel 0
This pin is effective when the channel-0 serial data output is
enabled.

P85

General-purpose I/O port

SI1

Serial data input pin for serial I/O channel 1
This pin is always effective when channel 0 is under input operation.

P86

General-purpose I/O port

SC1

Serial clock I/O pin for serial I/O channel 1
This pin is effective when the channel-0 clock output is enabled.

P87

This pin is a general-purpose I/O port.

SO1

Serial data output pin for serial I/O channel 1
This pin is effective when the channel-0 serial data output is
enabled.

P90

General-purpose I/O port (However, the N ch is open drain.)

SDA

Data I/O pin for the I

C interface. This function is effective when

operation of the I

C interface is enabled.

Also, set the port output to the Hi-Z state when operating the I

interface.

SO3

Hi-Z

Serial data output pin for serial I/O channel 3
This pin is effective when the channel-3 serial data output is
enabled.

Содержание MB90M405





























Результаты поиска

Содержание MB90M405

Отзывы:

Похожие инструкции для MB90M405

Бренды по названию

Популярные бренды

Fujitsu MB90M405, Руководство по оборудованию

Результаты поиска

Содержание MB90M405

Отзывы:

Похожие инструкции для MB90M405

Бренды по названию

Популярные бренды