LTO-6 Half-Height SAS Tape Drive
29
Operating the Drive
5.4
Inserting a Tape Cartridge
To insert a tape cartridge:
1. Ensure that the drive is powered on.
2. Grasp the cartridge so that the write-protect switch faces you (see 1 in
figure 4
.
3. Slide the cartridge into the tape load compartment.
I
a) If the cartridge is already in an ejected position and you want to
reinsert it, remove the cartridge then insert it again.
b) If the cartridge is already loaded and you cycle the power, the tape
will reload.
Figure 4: Inserting a cartridge into the drive
