Fujitsu Lifebook P771 Скачать руководство пользователя

Страница: 50 / 87

Working with the notebook

Connecting the notebook to the Port Replicator

If you connect the notebook to the Port Replicator during operation, problems can
occur. We recommend that you switch off the notebook beforehand.

The mains adapter must be connected to the Port Replicator when the
notebook is connected to the Port Replicator.

We recommend that the notebook is not operated with the LCD screen closed when
the notebook is connected to the Port Replicator. The resulting overheating can
cause reduced performance and increased activity of the integrated fan.

PortReplicator

►

Switch the notebook off.

►

Remove the mains plug for the mains adapter from the mains socket.

►

Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.

►

Position the notebook so that it is in line with the back edge of the Port Replicator.

►

Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly.

Fujitsu Technology Solutions

Содержание Lifebook P771
























































































Результаты поиска

Содержание Lifebook P771

Отзывы:

Похожие инструкции для Lifebook P771

Бренды по названию

Популярные бренды

Fujitsu Lifebook P771, Руководство по эксплуатации

Результаты поиска

Содержание Lifebook P771

Отзывы:

Похожие инструкции для Lifebook P771

Бренды по названию

Популярные бренды