Fujitsu Lifebook E6550, Инструкция по эксплуатации

Страница: 64 / 110

56
Insert the floppy disk with the label upwards
and the shutter side first until the EJECT
button springs out.
Loading/Ejecting a Floppy Disk
Loading
Insert into the floppy disk drive.
Ejecting
Label
Check that the floppy disk unit’s access lamp
is out, then press the EJECT button.
EJECT button
Access lamp
Critical Point
If you eject the floppy disk while the floppy
disk unit’s access indicator is still on, there
is a risk of losing the data on the disk.
When you do not want to erase the data
saved on the disk, or when you do not want
to write additional data, slide the floppy
disk’s write protector so that the hole is
open (WRITE PROTECT state). When you
want to write data again, slide the write
protector so that the hole is closed.
This item explains how to load and eject floppy disks.
Write protector
WRITE
ENABLE
WRITE
PROTECT
Bis Sec 2 (50-60) 2/2/00, 11:27 56