Fujitsu Lifebook E6550, Инструкция по эксплуатации

Страница: 79 / 110

71
SECTION 3
Figure 1-2 Main - Primary/Secondary Master Menu
Setup Item
Type
Cylinders
Heads
Selections
Auto
None
CD-ROM
ATAPI Removable
User
0 to 65535
1 to 16
Note (Item Specific Help)
Select ATA/ATAPI device type. If ‘Auto’ is
selected, the type is automatically identified
at POST by the BIOS. It does not carry out
Cylinder/Head/Sector display in the case of
over 8.4GB-HDD when Auto mode. If ‘None’
is selected, all of the following setup items do
not appear. When ‘User’ is selected, you can
specify Cylinders, Heads and Sectors.
User = you enter parameters of hard-disk
drive installed at this connection.
Auto = autotypes ATA/ATAPI drive installed
here.
CD-ROM = a CD-ROM drive is installed here.
ATAPI Removable = removable disk drive is
installed here.
This item appears when ‘Auto’ is selected and
the type is identified as hard disk, or ‘User’ is
selected. When ‘User’ is selected, you can
change the value.
Specify the number of Cylinders.
This item appears when ‘Auto’ is selected and
the type is identified as hard disk, or ‘User’ is
selected. When ‘User’ is selected, you can
change the value.
Specify the number of Heads.
1.1.1 Main - Primary Master, Secondary Master Menu
S
S
F1 Help
↑↓
Select Item -/Space Change Value F9 Setup Defaults
ESC Exit
←→
Select Menu Enter Select
:
Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Info Exit
Primary Master [FUJITSU MHG2102AT]
Type: [ AUTO ]
Maximum Capacity: 12073 MB
Multi-Sector Transfers: [16 Sectors]
LBA Mode Control: [Enabled]
PIO Transfer Mode: [Fast PIO 4]
DMA Transfer Mode: [Ultra DMA 2]
Item Specific Help
Select ATA/ATAPI
drive installed here.
[Auto]
The BIOS auto-type
the drive on boot
time.
Except [Auto]
You enter parameters
of the drive.
[None]
The drive is disabled.
Bis Sec 3 (69-78) 2/2/00, 11:27 71