Fujitsu Lifebook E6550, Инструкция по эксплуатации

Страница: 38 / 110

30
Loading/Ejecting a Floppy Disk
This item explains how to load and eject a floppy disk.
Loading
Insert into the floppy disk drive.
Insert the floppy disk with the label upwards
and the shutter side first until the EJECT
button springs out.
Ejecting
Press the EJECT button.
Check that the on the Status Indicator
LCD is not on, then press the EJECT button.
Critical Point
If you eject the floppy disk while is still
indicated, there is a risk of losing the data
on the disk.
When you do not want to erase the data
saved on the disk, or when you do not want
to write additional data, slide the floppy
disk’s write protector so that the hole is
open (WRITE PROTECT state). When you
want to write data again, slide the write
protector so that the hole is closed.
Write protector
WRITE
ENABLE WRITE
PROTECT
floppy disk
Press the
EJECT
button.
Press the
EJECT
button.
Bis Sec 1(22-33) 2/2/00, 11:26 30