Fujitsu LifeBook E-6666, Руководство пользователя

Страница: 66 / 110

55
SECTION 2
Setting Passwords
When shipped from the factory, no passwords are set. You have a choice of having no password or
setting a supervisor and user password. You must set the supervisor password before the user pass-
word.
POINT
The purpose of supervisor password is to be able to bypass the user password in case the user
password is forgotten. The supervisor password alone will not lock the system.
Enter Button
After entering the button strokes, push this button to enter the password into the notebook. Refer
diagram above.
Setting Supervisor Password
You must set a supervisor password prior to setting any user passwords. The supervisor password
can bypass the user password.
1. Go to the Start menu.
2. Click on Run
3. Type in FJSECS.EXE, then press [Enter]
4. Follow the on-screen instructions to set the Supervisor password.
Setting User Password
1. Go to the Start menu.
2. Click on All Programs.
3. Click on Security Panel Application and Set User Password.
4. Follow the on-screen instructions to set the User password.
POINT
You may change or remove the supervisor or user password by repeating the steps defined above.