Fujitsu Lifebook C2220, Руководство пользователя

Страница: 60 / 122

54
L i f e B o o k C S e r i e s N o t e b o o k – S e c t i o n F i v e
STOPPING TRANSMISSION
To use this product inside hospitals, clinics, or airplanes,
or in other places where the use of electronic equipment
is regulated, stop the transmission of radio waves from
the wireless LAN beforehand.
Deactivation using the wireless switch
The transmission of radio waves from the wireless LAN
can be stopped by setting the wireless switch to the Off
position. Note that the Wireless LAN On/Off switch has
no effect on non-Wireless LAN models.
For the location of the wireless switch, refer to the appli-
cable section of the User’s Guide.
Deactivation using Windows
1. Click [Start] --> [Settings (Windows 2000 only)]
-> [Control Panel] --> [Broadcom Wireless Util-
ity]. The Broadcom Wireless Configuration Utility
window will be displayed.
2. Click the Wireless Networks tab.
3. Click the [Enable Radio] box to clear it, then click
the [OK] button. Wireless communications on/off
switching will be deactivated and the transmission
of radio waves from the wireless LAN will be
stopped.
STARTING TRANSMISSION
To communicate using the wireless LAN function, set
the computer to a status from which it can transmit, as
follows:
1. Click the Wireless Network Connection icon in the
system tray at the lower right of your screen.
2. Click [Enable Radio]. The radio will be turned on.
Infrastructure Mode: Transmission is enabled.
Ad Hoc Mode: Restart your computer to enable the
radio.
P O I N T
To restart transmission, check the [Enable Radio]
checkbox to select it., then click the [OK] button.
Brie3-B5FH-8711.book Page 54 Wednesday, May 14, 2003 10:37 AM