Fujitsu Lifebook A3040, Руководство пользователя

Страница: 60 / 120

54
L i f e B o o k A S e r i e s N o t e b o o k - S e c t i o n F i v e
Before Using the Wireless LAN
This manual describes the procedures required to prop-
erly setup and configure the integrated Wireless LAN
Mini-PCI device (referred to as "WLAN device" in the
rest of the manual). Before using the WLAN device, read
this manual carefully to ensure it's correct operation.
Keep this manual in a safe place for future reference.
Wireless LAN Devices Covered by this Document
This document is applicable to systems containing the
following device:
Atheros AR5006X (WLL4070) Mini-PCI wireless
network card (802.11a+b/g)
Characteristics of the WLAN Device
■
The WLAN device is a Mini-PCI card attached to the
main board of the mobile computer.
■
The WLAN devices operate in license-free RF bands,
therefore eliminating the need to procure an FCC
license to operate. The WLAN devices operate in the
2.4GHz Industrial, Scientific, and Medical (ISM) RF
band and in the lower and middle bands of the 5GHz
Unlicensed National Information Infrastructure
(UNII) bands.
■
The WLAN devices are capable of three operating
modes, IEEE802.11a, IEEE802.11b and IEEE802.11g.
■
Encoding of data is modulated using Direct Sequence
Spread Spectrum (DSSS) and Complementary Code
Keying (CCK) when the WLAN device is operating in
IEEE 802.11b mode and Orthogonal Frequency Divi-
sion Multiplexing (OFDM) when operating in
IEEE802.11a or IEEE802.11g mode.
■
The WLAN device is Wi-Fi certified and operates at
the maximum data transfer rate of 54 Mbps in
IEEE802.11a or IEEE802.11g mode and 11 Mbps in
IEEE802.11b mode.
■
The maximum communication range indoors is
approximately 80 feet (25 meters). However, that
range will increase or decrease depending on factors
such as number of walls, reflective material, or inter-
ference from external RF sources.
■
The WLAN device supports the following encryption
methods - WEP, CKIP, TKIP, and AES encryption.
WIRELESS LAN MODES USING THIS DEVICE
Ad Hoc Mode
(See Figure 5-1)
"Ad Hoc Mode" refers to a wireless network architecture
where wireless network connectivity between multiple
computers is established without a central wireless
network device, typically known as Access Point(s).
Connectivity is accomplished using only client devices
in a peer-to-peer fashion. That is why Ad Hoc networks
are also known as peer-to-peer networks. Ad Hoc
networks are an easy and inexpensive method for estab-
lishing network connectivity between multiple
computers.
Prior to using the wireless LAN device, be
sure to run the Click Me! utility, as detailed
in “Installing Click Me!” on page 26.
Figure 5-1. Ad Hoc Mode Network
A3040-B6FH-8841-01EN-01.book Page 54 Wednesday, January 18, 2006 9:31 AM