4
NAME OF PARTS
1
Operating control panel
2
MANUAL AUTO button
M
When the MANUAL AUTO button is pressed in
for more than 10 seconds, the forced cooling
operation will start.
M
The forced cooling operation is used at the
time of installation.
Only for authorized service personnel’s use.
M
When the forced cooling operation starts by
any chance, press the START/STOP button
to stop the operation.
M
Please press the button at Filter Reset.
3
Remote control signal receiver
4
OPERATION indicator lamp (green)
5
TIMER indicator lamp (orange)
M
TIMER indicator lamp lights when the timer
is set from wireless remote controller.
M
If the TIMER indicator lamp flashes when the
timer is operating, it indicates that a fault has
occurred with the timer setting (see “AUTO
Restart” on page 17).
6
ECONOMY indicator lamp (green)
ECONOMY indicator lamp lights in the
following operations:
ECONOMY operation
•
10
•
°C HEAT operation (controlled by wireless
remote controller)
7
Intake grille
8
Up/down air direction flaps
9
Right/left air direction louvers
(behind up/down air direction flaps)
Indoor unit
