Fujitsu Inverter ABTG54LR, Руководство по эксплуатации

Страница: 11 / 20

11
ADJUSTING THE DIRECTION OF AIR CIRCULATION
DANGER
Never place fingers or foreign objects inside the
outlet ports, since the internal fan operates at
high speed and could cause personal injury.
M
Attempting to move up/down air direction
flaps or right/left air direction louvers man-
ually could result in improper operation; in
this case, stop operation and restart. The
louvers should begin to operate properly
again.
M During use of the cooling and dry modes,
do not set the up/down air direction flaps
in the heating range (
4
to
5
) for long
periods of time, since water vapor may
condense near the outlet louvers and
drops of water may drip from the air condi-
tioner. During the cooling and dry modes,
if the airflow direction louvers are left in
the heating range for more than 30 mi-
nutes, they will automatically return to
position
3
.
M
When used in a room with infants,
children, elderly or sick persons, the air
direction and room temperature should
be considered carefully when making
settings.
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
M
Adjust the up, down, left and right air directions with the air direction buttons on the remote controller.
M
Use the air direction buttons after the indoor unit has started operating and the airflow-direction louvers have stopped moving.
Vertical Air Direction Adjustment
Press the SET button (Vertical).
Each time the button is pressed, the air direction range will change as follows:
1 2 3 4 5
Types of Airflow Direction Setting:
1
,
2
,
3
: During cooling/dry modes
1
,
2
,
3
,
4
,
5
: During heating mode*
The remote controller display does
not change.
M
Use the air direction adjustments within the ranges shown above.
M
The vertical airflow direction is set automatically as shown, in accordance with the type
of operation selected.
Horizontal flow
1
: During cooling/dry mode
Downward flow
5
: During heating mode*
M
During AUTO mode operation, for the first minute after beginning operation, airflow will
be horizontal
1
; the air direction cannot be adjusted during this period.
Horizontal Air Direction Adjustment
Press the SET button (Horizontal).
Each time the button is pressed, the air direction range will change as follows:
1 2 3 4 5
The remote controller display does
not change.
M
Use the air direction adjustments within the ranges shown above.
1
2
3
4
5
1 2
3
4 5
Right/left air direction louvers