Fujitsu Impact 3650, Руководство по обслуживанию

Страница: 32 / 155

32
(2) Operational errors
The PAPER OUT indicator is lighted.
The buzzer sounds, the PAPER OUT indicator lights up, and the printer is placed offline when operation is
required.
Refer to Table 3.2.
Table 3.2 Operational errors
Error name Cause of the error Recovery
Paper end (PE)
error The printer has run out of continuous forms.
Supply forms and load them
into the printer.
Cut-sheet feeder
error The cut-sheet feeder has run out of cut sheets or has
detected a paper jam. • Remove the jammed sheet.
Clear any jam.
• Supply cut sheets and load a
cut sheet.
Notes:
1. The printer cannot be set online until these errors are cleared.
2. The paper end is ignored if setup item PPR-OUT: IGNORE is set.
3. A cut-sheet feeder error is detected during paper loading.
The REMOVE PAPER indicator blinks.
When removing the paper on the paper table is required The REMOVE PAPER indicator blinks.
In this case operator must remove paper for loading new paper.
The PS sensor detects this error by reflecting light form the paper or other
obstruction.
It also detected by light that is shining into the photo sensor when the paper table is removed.
Therefore (anyway) paper table must be installed correctly.
(3) Fatal alarms
The power shut down by itself.
The printer cannot display the alarm if it detects one of the following alarms that turn off printer power.
Disconnect components or connectors for related alarms, then check the cause of the alarm.
Table 3.3 Alarms that turn power off
Error name Cause of the error
SP motor driver alarm The SP motor driver is faulty. (The motor is driven for an abnormally long
time.)
LF motor driver alarm The LF or CSF motor driver is faulty. (The motor is driven for an abnormally
long time.)
Print head alarm
+34 V over voltage alarm