1
I n s t r u c t i o n s t o b e r e a d b e f o r e u s i n g t h e
equipment.
Please comply with the following instructions in order
to avoid any risk of injury or inappropriate use of the
appliance.
1.1
Safety instructions
1.1.1
Start-up
F
Do not switch the appliance on until every
fillings have been done.
F
Do not try to install this appliance yourself.
F
This heat pump requires an appropriately
qualified person to install it.
F
The installation must always be connected to
the Earth and fitted with a protective circuit
breaker.
F
Do not modify the electricity supply.
F
The appliances are not fireproof and should
therefore not be installed in a potentially
explosive atmosphere.
1.1.2
Use
F
Do not let children insert foreign bodies into
the fan protection grill or climb on top of the
outside unit. The fins on the air exchanger are
extremely fine and cause cuts.
F
Nothing should obstruct the air circulation
through the evaporator and from the fan.
F
Do not climb on the top of the outside unit.
F
The room in which the appliance is operating
must be correctly ventilated in order to
prevent any loss of oxygen if there is an
escape of refrigerant gas.
F
Consult your Installer before making any
changes or modifications to the premises
where the appliance is installed.
F
Do not place any heat source under the
remote control.
1.1.3
Maintenance
F
Do not try to repair this appliance yourself.
F
T h i s a p p l i a n c e d o e s n o t c o n t a i n a n y
components capable of being repaired by the
user himself. Removing one or other of the
c o v e r s c a n e x p o s e y o u t o d a n g e r o u s
electrical voltages.
F
In any case, switching off the current is not
sufficient to protect you from any external
electrical shocks (capacitors)
F
Do not open the outside unit or the hydraulic
unit while they are operating.
F
Switch off the power supply if there are any
abnormal noises, smells or smoke coming
from the appliance and contact your installer.
F
Switch off the power to the appliance before
you clean it.
F
Do not use aggressive cleaning liquid or
solvents to clean the body work.
F
Do not use a pressure washer to clean the
outside unit.
This could damage the air
exchanger and the water might penetrate into
the electrical circuits.
Instruction manual “1353-EN”
3
Heat pump, split, single service
