Fujitsu Heat pump, Руководство по эксплуатации

Страница: 12 / 16

12 Instruction manual “1353-EN”
Heat pump, split, single service
Line Function Setting range or
display Setting
increment
B a s i c
setting
Heating time programme, circuit 2
If the installation consists of 2 heating circuits (only with the 2nd circuit kit option)
520 Pre-selection (day / week)
Mon-Sun Mon-Fri Sat-Sun Monday Tuesday… Mon-Sun
521 1st phase On (start) 00 : 00… - -:- - 10 min 6 : 00
522 1st phase Off (end) 00 : 00… - -:- - 10 min 22 : 00
523 2nd phase On (start) 00 : 00… - -:- - 10 min - -:- -
524 2nd phase Off (end) 00 : 00… - -:- - 10 min - -:- -
525 3rd phase On (start) 00 : 00… - -:- - 10 min - -:- -
526 3rd phase Off (end) 00 : 00… - -:- - 10 mn - -:- -
536 Standard values, Circuit 2 no, yes no
Yes + OK: The standard values memorised in the regulator replace and cancel the customised heating programmes. Your
customised settings are therefore lost.
Time programme 4 / DHW
If the installation is fitted with a tank (only with the DWH kit option)
560 Pre-selection (day / week)
Mon-Sun Mon-Fri Sat-Sun Monday Tuesday… Mon-Sun
561 1st phase On (start) 00 : 00… - -:- - 10 min 00 : 00
562 1st phase Off (end) 00 : 00… - -:- - 10 min 05: 00
563 2nd phase On (start) 00 : 00… - -:- - 10 min - -:- -
564 2nd phase Off (end) 00 : 00… - -:- - 10 min - -:- -
565 3rd phase On (start) 00 : 00… - -:- - 10 min - -:- -
566 3rd phase Off (end) 00 : 00… - -:- - 10 min - -:- -
576 Standard values no, yes no
Yes + OK: The standard values memorised in the regulator replace and cancel the customised heating programmes. Your
customised settings are therefore lost.
Time programme 5 / Cooling
If the installation is fitted with the cooling kit (only with the cooling kit option)
600 Pre-selection (day / week)
Mon-Sun Mon-Fri Sat-Sun Monday Tuesday… Mon-Sun
601 1st phase On (start) 00 : 00… - -:- - 10 min 6 : 00
602 1st phase Off (end) 00 : 00… - -:- - 10 min 22 : 00
603 2nd phase On (start) 00 : 00… - -:- - 10 min - -:- -
604 2nd phase Off (end) 00 : 00… - -:- - 10 min - -:- -
605 3rd phase On (start) 00 : 00… - -:- - 10 min - -:- -
606 3rd phase Off (end) 00 : 00… - -:- - 10 min - -:- -
616 Standard values no, yes no
Yes + OK: The standard values memorised in the regulator replace and cancel the customised heating programmes. Your
customised settings are therefore lost.