Fujitsu FPCM11642 - LB T5010 C2D/2.4 13.3 2GB-160GB DVDR WLS CAM W7P, Руководство пользователя

Страница: 76 / 124

68
L i f e B o o k P 5 0 0 0 N o t e b o o k S e c t i o n F i v e
Troubleshooting
Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the
following table.
Problem Possible Cause Possible Solution
Unavailable
network
connection Incorrect network
name (SSID) or
network key Ad hoc connection: set the network names (SSIDs) and network keys of
all computers to be connected to the same values.
Infrastructure connection: set the network name (SSID) and network
key to the same values as those of the access point.
Set the network authentication according to the access point.
For the method of setting network authentication, refer to the following
pages:· Windows XP: "Assigning parameters" on page 55·
Windows 2000: "Assigning parameters" on page 61
Poor radio wave
condition Ad hoc connection: Retry connection after shortening the distance to
the destination computer or removing any obstacles for better sight.
Infrastructure connection: Retry connection after shortening the
distance to the access point or removing any obstacles for better sight.
To check the wave condition, refer to the following pages:· Windows
XP: "Confirming the status of the radio waves" on page 59.· Windows
2000: "Confirming the status of the radio waves" on page 65
Radio wave
transmission has
stopped Check if the wireless switch is turned ON. Also verify "Disable Radio" is
not checked in "Network setting" window. Refer to "Starting Transmis-
sion" on page 54.
The computer to be
connected is turned
off Check if the computer to be connected is turned ON.
Active channel
duplication due to
multiple wireless
LAN networks If there is any other wireless LAN network nearby, change channels to
avoid active channel duplication. For the method of checking active
channels, refer to the following pages:· Windows XP: "Confirming the
status of the radio waves" on page 59· Windows 2000: "Confirming the
status of the radio waves" on page 65
No right of access to
the network to be
connected Check if you have a right of access to the network to be connected with.
Incorrectly-
performed network
setting Check the protocol, work group name or shared setting.
For the method of checking, refer to the following pages:· Windows XP:
"Connection to the Network" on page 57· Windows 2000: "Connec-
tion to the Network" on page 63
Unmatched
[Network
authentication
(shared mode)]
settings in Windows
XP If the setting of [Network authentication (shared mode)] is not matched
with that of access point or computer to be connected with, no commu-
nication can be established. Check the parameter setting.Refer to
"Assigning parameters" on page 55.
P5010.book Page 68 Monday, April 7, 2003 6:39 PM