Fujitsu FibreCAT TXF, Руководство по эксплуатации

Страница: 5 / 57

FibreCAT TXF
Operating Manual 5
1 Preface
The demand for scalable storage capacity and the increasing trend towards
rack-based servers call for correspondingly compact and powerful backup
systems that can ensure the necessary data security.
Figure 1: FibreCAT TXF backup subsystem
The FibreCAT TXF backup subsystem provides a flexible means of consoli-
dating rack-based data security. The FibreCAT TXF backup subsystem makes
it possible to install today's backup devices (such as LTO3 Ultrium, DDS Gen5,
VXA-320, etc.) in a separate 19" housing. The FibreCAT TXF backup
subsystem is available in different models for SCSI-, SAS-, or USB technology.
Each I/O module has 4 ports for the connection of up to 4 servers and it has a
power management for the remote on/off of a single drives or the complete
system. The backup subsystem provides four 1.6"-high bays for this purpose.
The backup subsystem is also ready to accommodate future backup devices.
The backup subsystem offers a simple, flexible and reasonably priced solution
for avoiding backup constraints and enabling expansion.
The models are equipped with different input modules and cable chain variants.
The FibreCAT TXF backup subsystem has an integrated power supply unit. The
FibreCAT TXF backup subsystem is cooled by a fan. The fan is monitored to
ensure that it does not fall below the nominal speed.
In the 19" rack, the FibreCAT TXF backup subsystem occupies three height
units (3 HU).