Fujitsu F9600 Interface, Руководство пользователя

Страница: 205 / 218

195
Prime Line
Preference
Your assigned extension is your prime line.
One programmable button is always assigned
to access this line. Your set can be
programmed to give you prime line
preference. This means that your extension's
prime line is selected automatically when you
lift the handset or press the
SPEAKER button.
The lamp indicator for your prime line flashes
to show that you are using the line.
Private Intercom A two-extension intercom group.
Ringing Line
Preference
Each Digital Telephone can be programmed to
allow ringing line preference. A ringing line is
automatically selected whenever you lift the
handset or press the
SPEAKER button. (If you
have both prime line and ringing line
preference and a non-prime line is ringing, the
ringing line is selected when you lift the
handset or press the
SPEAKER button.)
Ringing line preference applies to both
standard and dial intercom lines.
Ringing Patterns Four different ringing patterns are produced by
each Digital Telephone. These patterns
indicate the following:
• Extension calls.
• Incoming calls.
• Camp-On callback and forwarded calls.
• Data calls.
Data call ringing pattern is produced in Digital
Telephones that are equipped with a Data
Terminal Adapter to indicate an incoming data
call. Each of these ringing patterns is
described in Table 5 at the end of this guide.
Voice Message
Indicator
The lamp indicator above a preprogrammed
message waiting ( MW ) button flashes to let
you know that there is a voice message
waiting. The indicator stops flashing after you
listen to all waiting voice messages.