Fujitsu ETERNUS LT40 S2, Установка, запуск и обслуживание

Страница: 48 / 110

Chapter 3 Operating the Tape Library
3.4 Magazines
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
48
A cleaning cartridge will not be used once it has exceeded its maximum count of operations (50 loads) or
when a medium error was detected during operation.
If there is more than one cleaning cartridge available, the one with highest load count will be used. This
causes the cleaning cartridge with the highest load count to wear out first.
3.4 Magazines
Cartridges are stored in magazines. Up to 12 cartridges can be stored in each magazine. Magazines may be
removed and inserted individually.
The ETERNUS LT40 S2/LT60 S2 LTO Library tape library has two removable magazines in the 4U library (see
Figure 3.5 and Figure 3.7 ). Magazine access can be password protected. For safety reasons, the robotic motion
is stopped when a magazine is removed. See section "3.5.6.6 Changing the Administrative Password" (page
62) . The magazines can be released using the Operator Control Panel (OCP) or the Remote Management Unit
(RMU). In case the OCP or RMU initiated process has failed or the library no longer has power a manual
emergency release is available. See section
"4.4 Magazine Does not Unlock via OCP or RMU" (page 77) .
3.4.1 Inserting Tape Cartridges Into a Magazine
The slot numbering scheme is shown in Figure 3.5 for the left magazine, and Figure 3.7 for the right
magazine.
Figure 3.5 Slot numbering left magazine with mailslot
Table 3.2 Slot numbering, left magazine
No. Description
1*,5*,9* Mailslot
2 -12 Slot
12
5*
4
2
8
7
6
1*
3
9*
11
10