Fujitsu ETERNUS LT40 S2, Установка, запуск и обслуживание

Страница: 4 / 110

Preface
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
Copyright 2018 FUJITSU LIMITED P3AM-5392-07ENZ0
4
Warnings
• Ventilation
The product should be situated so that its location or position does not interfere with proper ventilation.
• Heat
The product should be situated away from heat sources such as radiators, heat registers, furnaces, or other
heat producing appliances.
• Power sources
The product should be connected to a power source only of the type directed in the operating instructions
or as marked on the product.
• Power cord protection
The AC line cord should be routed so that it is not likely to be walked on or pinched by items placed upon or
against it, paying particular attention to the cord at the wall receptacle, and the point where the cord exits
from the product.
• Object and liquid entry
Care should be taken to insure that objects do not fall and liquids are not spilled into the product’s
enclosure through openings.
Precautions
• Do not expose the unit to moisture. The operating temperature for this unit is between 10

C (50

F) and
35

C (95

F).
• Use the unit on a firm level surface free from vibration.
• Do not place anything on top of the unit.
Product Warranty Caution
The warranty for the tape library shall not apply to failures of any unit when:
• The tape library is physically abused or used in a manner that is inconsistent with the operating
instructions or product specification defined by the manufacturer.
• The tape library fails because of accident, misuse, abuse, neglect, mishandling, misapplication, alteration,
faulty installation, modification, or service by anyone other than the factory service center or its approved
agent.
• The tape library is repaired by anyone, including an approved agent, in a manner that is contrary to the
maintenance or installation instructions supplied by the manufacturer.
• The manufacturer's serial number tag is removed.
• The tape library is damaged because of improper packaging on return.
• Unauthorized modifications to the unit configuration by the customer may result in loss of guarantee by
the vendor.