manualshive.com logo in svg

Fujitsu ETERNUS DX60 S3, Руководство по настройке, Страница: 97 / 160

Поделиться
Скачать
Fujitsu ETERNUS DX60 S3 Скачать руководство пользователя страница 97

•

Enter the domain name or IP address of the Syslog server in "Domain Name /IP Address".

(2)

Click the [Set] button.
A confirmation screen appears.

(3)

Click the [OK] button.
Setting of the audit log starts.

(4)

Check the setting completion message and click the [Done] button.
The screen display returns to the [Audit Log] screen.

6.5

Monitoring Server (SNMP Manager) Settings

Install and set up the monitoring software on the server side.
Refer to the manual for the monitoring software to install and set the monitoring software.

 

Register the file that was downloaded in "Download the MIB file" (

Step 6

) in 

"6.2.1 SNMP Trap Setup"

(page 82)

 as the MIB definition file for the monitoring software.

 

Chapter 6 Monitoring Settings
6.5 Monitoring Server (SNMP Manager) Settings
 

97

FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)

Copyright 2014 FUJITSU LIMITED

P3AM-9002-01ENZ0

Содержание ETERNUS DX60 S3

































































































































































Отзывы:

Нет отзывов