manualshive.com logo in svg

Fujitsu ETERNUS DX60 S3, Руководство по настройке

Поделиться
Скачать
Fujitsu ETERNUS DX60 S3 Скачать руководство пользователя страница 145

14

Change the status of all the disks with [Offline] to [Online]. In this case, change the status of Disk 1
through to Disk 8 to [Online].

After the status of the disks is changed to [Online], file systems and drive letters are assigned.

 

If any drive letter is unused, the unused drive letter is assigned in ascending order of the drive let-
ters, which results in discontinuous drive letters. Change the automatically assigned drive letter if
necessary.

 

15

Check if the file that was created in 

Step 8

 in 

"■ Operation Disk Settings" (page 130)

 in 

"8.2.3.2 Disk

Settings" (page 130)

 is displayed for the copy source drive.

Chapter 9 Advanced Copy Settings
9.2 Performing a Copy ()
 

145

FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)

Copyright 2014 FUJITSU LIMITED

P3AM-9002-01ENZ0

Содержание ETERNUS DX60 S3

































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды