manualshive.com logo in svg

Fujitsu ETERNUS DX60 S3, Руководство по настройке, Страница: 79 / 160

Поделиться
Скачать
Fujitsu ETERNUS DX60 S3 Скачать руководство пользователя страница 79

Do Not

•

Do not uninstall the drives that are installed by default or move them to any other
slot.
Contact your sales representative or maintenance engineer if drives that are instal-
led by default need to be uninstalled or moved to another slot.

■

Global Hot Spare Registration

The procedure to register a Global Hot Spare is as follows:

1

Click the [Component] tab on the navigation of the ETERNUS Web GUI screen. On the [Component]
screen, click [Drives] in [Category].
The [Drives] screen appears.

2

Select the drive that is to be registered as the Global Hot Spare and click [Assign Global HS] in [Action].

A confirmation screen appears.

3

Click the [OK] button.
The Global Hot Spare is registered and the registration completion screen appears.

Chapter 5 General Settings
5.7 RAID Configuration Settings
 

79

FUJITSU Storage ETERNUS DX60 S3 Disk storage system Configuration Guide (Basic)

Copyright 2014 FUJITSU LIMITED

P3AM-9002-01ENZ0

Содержание ETERNUS DX60 S3

































































































































































Отзывы:

Нет отзывов