Fujitsu Esprimo E5 Series, Руководство по эксплуатации

Страница: 25 / 73

Getting started
Switching on for the fi rst time: installing the software
Installing, Software, Installing,
Once the installation has been started the device must not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrated into a network, the user and server details as well as
the network protocol are required during the software installation.
Contact your network administrator if you have any questions about these settings.
When you switch on the device for the fi rst time, the supplied software
is installed and con fi gured. Plan a reasonable amount of time for this,
as this process must not be interrupted.
You may need the licence number for Windows during the installation. The licence
number is located on a sticker on your device.
Switching on the monitor and device
In order to avoid overheating, do not cover the ventilation areas
of the monitor or the device.
Depending on the variant, the device may be equipped with a main power switch on
the back of the device in addition to the ON/OFF button on the front.
► Switch the monitor on (see the operating manual for the monitor).
2
1
► On devices with main power switch: set the main switch on the back of
the device to the "I" position (1).
► Press the ON/OFF switch on the front of the device (2).
The power indicator glows and the device is started.
Fujitsu 21